Shop | ultrahighvacuum

CF Fittings

CF Vacuum Fittings on this site comply with the ISO 3669 standard and CF Vacuum Fittings up to NW200 are compatible with ConFlat flanges and CF flanges from other leading manufacturers.

While there is no general standard for CF flanges NW250 and over, essentially two “standards” have come into use, one Anglo-American and one European, both of which are available in our product line. Other standards are also used by some other manufacturers and in use at some research centres.

Due to UHV bakeability requirements, sealing of the CF flanges is provided by use of Oxygen-free copper (OFHC) flat gasket rings which usually can only be used once due to deformation. The tightening pressure is exerted by through-bore screws that have to be tightened uniformly and crosswise to avoid excessive strain.

Material: 304L stainless steel as standard, 316L and other materials can be supplied upon request
Bakeable to 450°C
Vacuum rating 1×10-11mbar
Wide ranges of elbows, crosses, tees and adaptors are available
Tubulated flanges are available for welding to stainless steel tube

CF150 Fixed Blank Flange SKU: F150 CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Add to Cart £ 83.97 83.97 GBP	CF150 Fixed Bored Flange, 203mm OD 152.5mm ID SKU: F150B CF Bored Flanges Fixed are used for welding onto tube to produce ports and connectors when manufacturing fabrications. Manufactured from: 304L and 316L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Bored Flanges Fixed are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Add to Cart £ 73.90 73.9 GBP	CF150 - Bored Tapped Flange, 152mm ID SKU: F150BT CF Bored Flanges Fixed are used for welding onto tube to produce ports and connectors when manufacturing fabrications. Manufactured from: 304L and 316L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Bored Flanges Fixed are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Add to Cart £ 103.99 103.99000000000001 GBP	CF150 Rotatable Blank CF Flange SKU: F150R CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L stainless steel as standard, 316L and other materials can be supplied • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Add to Cart £ 109.95 109.95 GBP
CF150 Rotatable Bored CF Flange, 203mm OD 152.5mm ID SKU: F150RB CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Add to Cart £ 119.95 119.95 GBP	CF150 Bored Rotatable Tapped Flange, 152mm ID SKU: F150RBT CF Bored Flanges Rotatable are used for welding onto tube to produce ports and connectors when mating with fabrications with the bolt holes in different alignments. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. Rotatable CF Bored Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Add to Cart £ 170.99 170.99 GBP	CF150 Blank Rotatable Tapped Flange SKU: F150RT CF Rotatable Blank Flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. CF Rotatable Blank Flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: 304L stainless steel as standard, 316L and other materials can be supplied • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Call for price	CF150 Blank Tapped Flange SKU: F150T CF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304L Stainless Steel. They are supplied in a plastic bag with a protective plastic cap. The CF Blank flanges are manufactured to the CF Standard and are compatible with other supplier’s product. • Material: Stainless Steel • Bakeable to 450°C • Vacuum Rating 1×10-11 mbar • Wide range of elbows, crosses, tees and adaptors are available • Tubulated flanges are available for welding to stainless steel tube * European standard, to be used with copper gasket OD 272.7 mm ...more Add to Cart £ 115.95 115.95 GBP

Clear Filters

Follow us

CF Fittings

CF Fittings