KF 90 Degree Elbows are used to change the direction of the pipework as required.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF 90 Degree Elbows are supplied in a sealed plastic bag with protective plastic caps.

KF 90 Degree Elbows are manufactured to the ISO Standard and are compatible with other suppliers’ products.

KF 45 Degree Elbows were manufactured for in vacuum process systems to help alter the direction of pipework.

This product is made from 304 stainless steel and helps reduce the amount of corrosion in semiconductor processing. KF 45 Degree Elbows is also helium leak tested up to 10-8 mbar. This product is supplied in a sealed plastic bag and protected by plastic caps.

This elbow is manufactured to the ISO standards and is compatible with alternative supplier’s products.

KF Flexible Vacuum Hoses are used to connect parts together when a solid straight connector is impractical or where the two parts move independently and flexibility is required.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Flexible Vacuum Hoses are supplied in a sealed plastic bag with protective plastic caps.

KF Flexible Vacuum Hoses are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flexible Vacuum Hoses are used to connect parts together when a solid straight connector is impractical or where the two parts move independently and flexibility is required.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Flexible Vacuum Hoses are supplied in a sealed plastic bag with protective plastic caps.

KF Flexible Vacuum Hoses are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flexible Vacuum Hoses are used to connect parts together when a solid straight connector is impractical or where the two parts move independently and flexibility is required.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Flexible Vacuum Hoses are supplied in a sealed plastic bag with protective plastic caps.

KF Flexible Vacuum Hoses are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flexible Vacuum Hoses are used to connect parts together when a solid straight connector is impractical or where the two parts move independently and flexibility is required.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Flexible Vacuum Hoses are supplied in a sealed plastic bag with protective plastic caps.

KF Flexible Vacuum Hoses are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO to KF Reducing Tees are used to bring in a branch line of a different size into a main line.

Manufactured from: 304 stainless steel. Helium leak tested to 10-8 mbar. ISO to KF Reducing Tees are supplied in a sealed plastic bag with protective plastic caps.

ISO to KF Reducing Tees are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO to KF Reducing Crosses are used to join two different branch lines of various sizes into a single main line.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. ISO to KF Reducing Crosses are supplied in a sealed plastic bag and protected with plastic caps.

ISO to KF Reducing Crosses are compatible with other supplier’s products and are manufactured to the ISO Standard.

ISO to KF Reducing Tees are used to bring in a branch line of a different size into a main line.

Manufactured from: 304 stainless steel. Helium leak tested to 10-8 mbar. ISO to KF Reducing Tees are supplied in a sealed plastic bag with protective plastic caps.

ISO to KF Reducing Tees are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO to KF Reducing Crosses are used to join two different branch lines of various sizes into a single main line.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. ISO to KF Reducing Crosses are supplied in a sealed plastic bag and protected with plastic caps.

ISO to KF Reducing Crosses are compatible with other supplier’s products and are manufactured to the ISO Standard.

ISO to KF Reducing Tees are used to bring in a branch line of a different size into a main line.

Manufactured from: 304 stainless steel. Helium leak tested to 10-8 mbar. ISO to KF Reducing Tees are supplied in a sealed plastic bag with protective plastic caps.

ISO to KF Reducing Tees are manufactured to the ISO Standard and are compatible with other supplier’s product.

ISO to KF Reducing Crosses are used to join two different branch lines of various sizes into a single main line.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. ISO to KF Reducing Crosses are supplied in a sealed plastic bag and protected with plastic caps.

ISO to KF Reducing Crosses are compatible with other supplier’s products and are manufactured to the ISO Standard.

CF to KF Tubulated reducing adaptors are used to change from a CF flange to a KF mating flange enabling the fitting together of mismatched components.

Manufactured from: 304L Stainless Steel. Helium Leak tested to 10-10 mbar. They are supplied in a plastic bag with protective plastic caps.

The CF to KF Tubulated Adaptors are manufactured to the CF and KF Standards and are compatible with other supplier’s product.

• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating 1×10-11 mbar
• Wide range of elbows, crosses, tees and adaptors are available

CF to KF Tubulated reducing adaptors are used to change from a CF flange to a KF mating flange enabling the fitting together of mismatched components.

Manufactured from: 304L Stainless Steel. Helium Leak tested to 10-10 mbar. They are supplied in a plastic bag with protective plastic caps.

The CF to KF Tubulated Adaptors are manufactured to the CF and KF Standards and are compatible with other supplier’s product.

• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating 1×10-11 mbar
• Wide range of elbows, crosses, tees and adaptors are available

CF to KF Tubulated reducing adaptors are used to change from a CF flange to a KF mating flange enabling the fitting together of mismatched components.

Manufactured from: 304L Stainless Steel. Helium leak tested to 10-10 mbar. They are supplied in a plastic bag with protective plastic caps.

The CF to KF Tubulated Adaptors are manufactured to the CF and KF Standards and are compatible with other supplier’s product.

• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating 1×10-11 mbar
• Wide range of elbows, crosses, tees and adaptors are available

KF Aluminium Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp.

Manufactured from Aluminium and Viton. KF Aluminium Centering Rings are supplied in a sealed plastic bag.

KF Aluminium Centering Rings are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flanges (Klien) are the standard din 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly.

Sealing is accomplished with a centering with a nitrile or viton o’ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp.

KF Bored Flanges points:

• Material: 304L stainless steel
• Bakeable to 150°C
• Vacuum Rating: 1×10-8 mbar
• Wide range of elbows, crosses and tees are available
• Tubulated Flanges are available for welding to stainless steel tube

KF Bored flanges are used for welding onto tube to produce ports and connectors when manufacturing fabrications.

Manufactured from: 304 Stainless Steel. KF Bored flanges are supplied in a sealed plastic bag with a protective plastic cap.

KF Bored flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly.

Sealing is accomplished with a centering with a nitrile or Viton O’ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp.

KF Blank Flanges points:
• Material: 304L Stainless Steel
• Bakeable to 150°C
• Vacuum Rating: 1×10-8 mbar
• Wide range of elbows, crosses and tees are available
• Tubulated flanges are available for welding to stainless steel tube

KF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc.

Manufactured from: 304 Stainless Steel. KF Blank flanges are supplied in a sealed plastic bag with a protective plastic cap.

KF Blank flanges are manufactured to the ISO Standard and are compatible with other supplier’s product.

KF Clamps Aluminium are used to clamp two flanges to a centering ring and an O-ring creating a vacuum seal.

KF Clamps Aluminium are manufactured from aluminium and are supplied in a sealed plastic bag.

KF Clamps Aluminium are manufactured to the ISO standard and are compatible with other supplier’s products.

KF Tubulated Reducing Adaptors are used to change the size of a tube or flange from one size to another. This enables mismatched components to be fitted together.

Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Tubulated Reducing Adaptors are supplied in a sealed plastic bag with protective plastic caps.

KF Tubulated Reducing Adaptors are manufactured to the ISO Standard. They are compatible with other suppliers’ products.