UltraHighVacuum.com

KF50 57mm Bored Flange SKU: KF50B57 KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly. Sealing is accomplished with a centering with a nitrile or Viton O-ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp. KF Bored Flanges points: • Material: 304L Stainless Steel • Bakeable to 150°C • Vacuum Rating: 1×10-8 mbar • Wide range of elbows, crosses and tees are available • Tubulated Flanges are available for welding to stainless steel tube KF Bored flanges are used for welding onto tube to produce ports and connectors when manufacturing fabrications. Manufactured from: 304 Stainless Steel. KF Bored flanges are supplied in a sealed plastic bag with a protective plastic cap. KF Bored flanges are manufactured to the ISO Standard and are compatible with other supplier’s product. ...more Add to Cart £ 6.97 6.97 GBP	KF50 Blank Flange SKU: KF50BS KF Flanges (Klien) are the standard DIN 28430 and ISO 2861 connections for vacuum fittings up to DN50 used in low and high vacuum. Along with the ancillary components, they offer a simple solution for applications requiring easy and repeated assembly. Sealing is accomplished with a centering with a nitrile or Viton O-ring squashed between a pair of KF Flanges and pulled together using a circumferential clamp. KF Blank Flanges points: • Material: 304L Stainless Steel • Bakeable to 150°C • Vacuum Rating: 1×10-8 mbar • Wide range of elbows, crosses and tees are available • Tubulated Flanges are available for welding to stainless steel tube KF Blank flanges are used to cap off the open ports where not required and are also used as a base part to manufacture adaptor fittings, instruments, feedthroughs etc. Manufactured from: 304 Stainless Steel. KF Blank flanges are supplied in a sealed plastic bag with a protective plastic cap. KF Blank flanges are manufactured to the ISO Standard and are compatible with other supplier’s product. ...more Add to Cart £ 3.98 3.98 GBP	KF50 Clamp - Aluminium SKU: KF50C KF Clamps Aluminium are used to clamp two flanges to a centering ring and an O Ring creating a vacuum seal. KF Clamps Aluminium are manufactured from aluminium and are supplied in a sealed plastic bag. KF Clamps Aluminium are manufactured to the ISO standard and are compatible with other supplier’s products. ...more Add to Cart £ 3.80 3.8000000000000003 GBP	KF50 to KF16 Tubulated Reducing Adaptor SKU: KF50R16 KF Tubulated Reducing Adaptors are used to change the size of a tube or flange from one size to another. This enables mismatched components to be fitted together. Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Tubulated Reducing Adaptors are supplied in a sealed plastic bag with protective plastic caps. KF Tubulated Reducing Adaptors are manufactured to the ISO Standard. They are compatible with other suppliers’ products. ...more Add to Cart £ 35.40 35.4 GBP
KF50 to KF25 Tubulated Reducing Adaptor SKU: KF50R25 KF Tubulated Reducing Adaptors are used to change the size of a tube or flange from one size to another. This enables mismatched components to be fitted together. Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Tubulated Reducing Adaptors are supplied in a sealed plastic bag with protective plastic caps. KF Tubulated Reducing Adaptors are manufactured to the ISO Standard. They are compatible with other suppliers’ products. ...more Add to Cart £ 22.74 22.740000000000002 GBP	KF50 to KF40 Tubulated Reducing Adaptor SKU: KF50R40 KF Tubulated Reducing Adaptors are used to change the size of a tube or flange from one size to another. This enables mismatched components to be fitted together. Manufactured from: 304 Stainless Steel. Helium leak tested to 10-8 mbar. KF Tubulated Reducing Adaptors are supplied in a sealed plastic bag with protective plastic caps. KF Tubulated Reducing Adaptors are manufactured to the ISO Standard. They are compatible with other suppliers’ products. ...more Add to Cart £ 26.54 26.54 GBP	KF50 Stainless Steel Centering Ring with Viton O-Ring SKU: KF50SVCR KF Stainless Steel Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp. Manufactured from 304 stainless steel and Viton. KF Stainless Steel Centering Rings are supplied in a sealed plastic bag. KF Stainless Steel Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products. ...more Add to Cart £ 3.95 3.95 GBP	KF50 Stainless Steel Meshed Centering Ring with Viton O-Ring SKU: KF50SVCRM KF Stainless Steel Reducing Centering Rings are used to connect two flanges of different internal sizes. This creates a vacuum seal with the use of a clamp. Manufactured from 304 Stainless Steel and Viton. KF Stainless Steel Reducing Centering Rings are supplied in a sealed plastic bag. KF Stainless Steel Reducing Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products. ...more Add to Cart £ 34.20 34.2 GBP
KF50 Trapped Centre ring with Viton O-Ring SKU: KF50SVCRT KF50 Trapped Centering Ring with Viton O-Ring KF Trapped Centering Rings with Viton O-rings are used to connect two flanges together and create a vacuum seal with the use of a clamp. They also provide for cases of slight over pressure. Manufactured from: 304 Stainless Steel, Aluminium and Viton. KF Trapped Centering Rings are supplied in a sealed plastic bag. KF Trapped Centering Rings are manufactured to the ISO standard and are compatible with other supplier’s products. ...more Add to Cart £ 4.21 4.21 GBP	Linear Translator with Aluminum Frame (Stepper Motor) 100mm Travel, CF114 Flange SKU: LBS63L100A The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options, and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 4,743.53 4743.53 GBP	Linear Translator with Aluminum Frame (Manual) 100mm Travel, CF114 Flange SKU: LBS63L100M The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 3,478.59 3478.59 GBP	Linear Translator with Aluminum Frame (Stepper Motor) 150mm Travel, CF114 Flange SKU: LBS63L150A The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 5,217.88 5217.88 GBP
Linear Translator with Aluminum Frame (Manual) 150mm Travel, CF114 Flange SKU: LBS63L150M The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options, and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 3,952.94 3952.94 GBP	Linear Translator with Aluminum Frame (Stepper Motor) 200mm Travel, CF114 Flange SKU: LBS63L200A The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options, and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 5,850.35 5850.35 GBP	Linear Translator with Aluminum Frame (Manual) 200mm Travel, CF114 Flange SKU: LBS63L200M The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options, and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 4,585.41 4585.41 GBP	Linear Translator with Aluminum Frame (Stepper Motor) 50mm Travel, CF114 Flange SKU: LBS63L50A The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 3,952.94 3952.94 GBP
Linear Translator with Aluminum Frame (Manual) 50mm Travel, CF114 Flange SKU: LBS63L50M The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options, and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 2,688.00 2688.0 GBP	Linear Translator with Aluminum Frame (Stepper Motor) 75mm Travel, CF114 Flange SKU: LBS63L75A The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options, and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 4,427.29 4427.29 GBP	Linear Translator with Aluminum Frame (Manual) 75mm Travel, CF114 Flange SKU: LBS63L75M The backplane linear drive is supported by an aluminum plate frame with sufficient stability and accuracy to carry heavy components in ultra-vacuum environments. This product has a variety of stroke options, and can choose manual or electric drive. • Working Pressure: 10-11 mbar~1 bar • Bakeable to 150℃ • Welded Bellows Seal with SS 316 • Top mounting flange: CF flange, tapped hole • Bottom mounting flange: CF flange, clear hole • Mounted in any orientation • Etched Scale in 1 mm Increments ...more Add to Cart £ 3,004.24 3004.2400000000002 GBP	Elevating Transfer Arm, CF35, 900mm stroke, Manual. (requires lifting table sold separately) SKU: LMTA35L900 Flange Size 70mm, Stroke 900mm (Also 600mm and 450mm stroke options available - call for details) The lifting magnetic coupling sample transfer rod uses magnetic coupling drive to drive linear motion and lifting motion. An anti-rotation device is designed inside to prevent the inner rod from rotating. The rotational motion of the outer magnetic sleeve is cleverly converted into the lifting motion of the grabbing head to achieve parking and grabbing of samples. This product adopts a fully enclosed structure welding, and the end of the vacuum side is a specially designed adapter structure for installing sample grabbing devices and other customized devices. ...more Add to Cart £ 6,514.67 6514.67 GBP